Custom Grades including MilSpec, Def STAN, NSN, AS & DTD available. Contact us for your unique requirements.
Our 306 Reinforced EPDM (Ethylene Propylene Diene Monomer) sheet can be manufactured to customer specification.
Reinforced or supported EPDM sheet offers all the inherent properties of our standard EPDM sheet but with added mechanical strength derived from an inserted substrate.
EPDM rubber is a versatile polymer which allows a high degree of variation in compound design for both general and specialty purposes.
Reinforced EPDM Sheeting | EPDM Insertion Sheet | EPDM Engineered Textiles or Fabrics are considered synonyms for the same products as technically they possess very similar characteristics.
Available as either single or multi-layer insertion, a range of custom manufacture options are available. Uncured reinforced EPDM sheeting can also be supplied up to 1.85m wide, options include:
Colour | Black or coloured reinforcement |
Width | Up to 1.85m – Depending on reinforcing layer |
Gauge | Rubber layer from 0.25mm upwards |
Total weight | >125 G/M2 |
Insertion weight | 65 G/M2 – 850 G/M2 |
Hardness | Ranging from 30 – 90 IRHD |
Construction | Single or multi-layer construction. |
Cure state | Cured or un-cured reinforced EPDM sheeting |
Surface finish | Cloth/ smooth finish surface |
Roll lengths | Customer request (10m+), bulk roll capability |
Ancillaries | Panel cutting, laminating, reinforced strip (slitting) |
Availability | Made to order to customer specification. Subject to minimum order quantity |